How to Change a Subaru Spare Key
If you’ve lost your Subaru car key, contact a locksmith. They can usually cut a new key for you cheaper than the dealer.
subaru forester replacement key fob car keys are typically either intelligent “push-to-start” fob remote keys, or simply metal keys. The Fob key has to be modified.
Keyless Entry System
The key fob can be used to lock and unlock your subaru smart key remotely. It can also open the trunk of your vehicle or the lift gate. These remotes use keys in your car to connect to the computer in your vehicle.
Subaru models include a less well-known feature called PIN Code Access. You can utilize a personalized number sequence to start and unlock your vehicle. If you have a newer subaru forester key replacement Forester, Outback, Crosstrek, WRX, WRX STI or Impreza that comes with this feature, check the owner’s manual to learn how to use it.
It’s possible that the battery in the key fob has died. You can test the battery life of your key fob using an electronic tester that you can carry around or a multimeter in your garage.
Next, you’ll want to take the key fob out of its case and inspect its transmitter circuit board. You will see one or two sets of 8 numbers. Write down the first one so you can remember it. After you’ve done this, you can begin programming your key fob at home. The procedure varies based on the year and model of your vehicle. However, it is usually easy enough to do yourself.
Key Fobs
subaru forester replacement key cost (my website)’s most recent models include key fobs that don’t just unlock doors, but also activate lights, lock the gas cap, and even start the car. This last feature is particularly beneficial if your experience includes arriving at the gas station only to find that your car won’t start because the battery for the key fob died.
Whether your Subaru is old or new, it’s likely that the key fob can be replaced without difficulty. Remember that some of the modern models, with their high level technology, may require an appointment with the dealer. But, with a bit of time and effort, you’ll find a replacement key fob to use at home.
Start by opening the case, and then examining the circuit board of the transmitter. (Instructions on opening the case are usually given in the owner’s manual). There should be one or two serial numbers with 8 digits each. Keep the first set of numbers for later information.
Then, sit in the driver’s seat and shut the doors. Turn the key ten times to start your car, and then turn off. Press the lock button on the key fob, then open the door to test whether your doors are working properly. After that close the door, and take the key out of the ignition. You should hear your car sound again, signalling that the key fob has been programmed.
Ignition System
If your Subaru keys aren’t functioning as they should, it could be because the key battery is dead. If you are aware of the issue, you can replace the battery in your key fob yourself. The replacement battery is inexpensive and easy to find. If your keypad doesn’t respond to your commands, there may be a problem with it. To find a spare key, you should go to an authorized dealer. They’ll guarantee that the key is genuine Subaru key that’s in warranty. It will also be programmed to your vehicle. This is much safer and easier than buying an aftermarket key from an organization on the internet.
You can also request that the dealer cut a new key if you provide them with your VIN number and proof of ownership. They’ll use this information to program the replacement key in order to be accepted by the immobilizer. This process is more complex than cutting a key, and the dealership will usually charge a higher price for this service.
Once the new key has been programmed, you’ll be able to swap it with your current key. You’ll only have five seconds to insert the second key, so it’s vital to have a working key handy. You can take the key off once the security light has stopped flashing and test it.
Battery Replacement
One of the main features that make Subaru fobs useful is their ability to turn on your car’s power windows and sunroof with a single touch of a button. The battery in your Subaru fob isn’t built to last forever, and it will require replacement at some point. Fortunately, replacing the battery is a straightforward process that you can complete yourself with the assistance of this brief guide from Capitol Subaru.
To begin you’ll need to locate the small crevice within the seam that divides the front and back of your key fob. You can then open the seam using an flat-head screwdriver to expose the small compartment that contains the battery. Remove the battery that was in it, and then put in a new one, making sure that it is facing the right side up. After you have put everything together is in place, you can use your new key fob for locking, unlocking, and starting your vehicle.
You should always have a spare set of keys, particularly if the one you have is damaged or lost. A new key can easily be purchased at your local auto dealer or you can get one made by locksmiths. It is essential that your key fob is working correctly as soon as you can so you can drive safely.