Choosing Upvc Window replacement hinges for upvc windows Hinges
The process of selecting and fitting upvc window replacement hinges isn’t as difficult as you might imagine. It is important to check the arrow on the hinges is facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm that is on the opening frame.
There are a variety of different kinds of hinges, each with its distinctive characteristics. This article will go over some of the most commonly used uPVC hinges, and their benefits.
Egress/Easy Clean Hinge
These are a great choice for replacing or upgrading your fire escape window because they can open to a full 90 degree angle. They can be closed to an easy-clean position that allows you to see the outside of windows without having to climb ladders or lean over dangerous angles.
These heavy-duty egress hinges are made by Yale which is among the most well-known and trusted home security brands available today. These hinges can be used with any type of uPVC side hung window. They can be moved to the easy-to-clean position by pressing in an unassuming button, and then sliding the window sash to one side. When the sash is closed, it will be reset to its original operative position.
Both 13mm and 17mm sizes are available. Use our Egress Selection Guide to help you select the best product for your window.
These hinges can be used with standard side-hung frames made of upvc door hinges, or aluminium. The friction hinges uk screw is used to adjust the resistance. This makes opening the window easier and reduces the chances of accidental closing during high winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
The Nico Egress Easy Clean friction hinge is simple to use and does not have buttons or catch. It is a simple and safe solution for emergency exit and cleaning. First, open the door to the egress (full opening) position and then press the hinge retaining clip that is located on the inside of the bottom corner. This will open both the bottom and top catches allowing you move the sash into the clean position. Once you are in the clean position close the window to reset the hinges back to their egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also known as “Easy Clean”) are used to replace side-opening windows to ensure fire safety. These hinges permit a larger opening in the event of fire. This type of hinge is a legal requirement in any room that has windows, as stipulated by building regulations.
The windows feature the benefit of a friction stop that allows the windows to open up to 90 degrees. They also let the opening sash to slide over the glass hinge when it’s opened which allows for simple cleaning without the need to use ladders. The hinges do not have catch or buttons and operate with an easy, secure lever that can be accessed from the inside of your home.
The hinges are manufactured in the UK by Cotswold and come complete with a child safety restraint for day-to-day use that can be overridden with a hidden button, giving you peace of mind that your children will not accidentally open the window too far. The stack heights are 13mm or 17mm.
To order these hinges simply measure the length of your existing side hung window hinge that fixes to the frame (see the guidelines for measuring your upvc window hinges). Select the proper size hinge from the choices below.
It is important to note that this measurement is taken at the part of the hinge that connects to the frame and not the sash. The actual hinge length may be shorter or longer dependent on how the old windows were manufactured. When deciding on the width of the hinge, most frames made of upvc will have a stack height of 13mm, but if your old window frame has 17mm, then select this option. Alternately, you can install the 4mm packer to make up for the difference. All hinges are supplied in pairs (1 left and 1 right). Screws aren’t included with the hinges. If needed, they can be purchased separately. We suggest using our upvc window hinge repair screws. They are specifically made to improve the performance of your hinges, allowing them to operate smoothly for a longer time. They come with a lower friction design and an enhanced weather seal, which includes a nylon reducer cap.
Restricted Hinge
Standard hinges can make it difficult to open windows fully. These child safety friction hinges are a fantastic solution to this problem. They can be used in situations where ventilation is needed but escaping or cleaning a fire is not possible. They work by restricting the amount that the sash can open, and allow for the control of this limitation with the push of a button. They are available in 13mm and 17mm stack heights and can be used to open both side and top hung windows.
The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor and an escape hinge to provide an efficient and easy way to meet building regulations. It is suitable for side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available in two pieces with one hinge being the one with restricted egress and the other hinge being unrestricted. This lets one hinge be installed at the bottom and the other is set on top.
These uPVC hinges are restrictive and have been tested to BS6375 Part 2 and are designed to be used on windows that cannot be fully opened such as a small children’s bedroom. The mechanism limits the amount the sash is able to open to the safety level of 100mm and re-engages once the window is closed.
As with the other types of uPVC friction hinges they can be installed on any type of window and are perfect for difficult to reach windows above the ground level, three-storey flats or those that typically require a ladder to reach them. They can be combined with our selection of security enhancements such as hinge guard protection plates or dog bolts to offer PAS 24 performance.
When replacing a window hinge, it is important to measure the length of the current hinge so that you can get replacements that are comparable in size. The easiest method to do this is by viewing the hinge in the image gallery and determining where you want it to be placed. Top hung hinges can be restricted to both sides and side-hung hinges are only restricted on one side.
Standard Hinge
Standard hinges have metal-to-metal contacts and do not require any additional components to reduce friction. It is available in many finishes and also has a fire rating. To determine the radius of your hinge lay it flat and line up the quarter and dime in two corners. If the quarter is more snug than the corner, then it should be turned to 5/8 inches.
The right hinge can make or ruin the appearance of your door hinge repair. It’s important to match the finish and style of your door to the hinges to create a seamless look that’s both functional and visually appealing.