Double Glazing Door Lock Repairs
Are your uPVC door or window mechanism broken? Perhaps the window or door handles don’t meet up properly or are difficult to use.
You will lose energy when your double-glazed doors do not work properly. This also increases the risk of burglary. Owen the Locksmith will be able to repair to double glazed windows your door lock for a reasonable cost.
Snapped Key
It can be a hassle when a key is snapped inside the lock. It also poses a security risk, as the door may not be locked and leave you vulnerable to intruders. Fortunately, there are some quick fixes that you can try to resolve the issue and get your door functioning correctly.
Keep calm. If you get scared and start doing a lot of fumbling around, you might just end up pushing the damaged piece of the key deeper into the lock, which could make the situation even more difficult.
Next, spray WD-40 or another penetrating oil into the lock to help the broken piece slip out more easily. You can also make use of a screwdriver to break up any pieces stuck that could be blocking the way. If you have a part of the key still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both methods work, but be careful not to push the broken key piece further into the keyway.
Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don’t happen to have one of these tools you can bend a hook using needle-nosed pliers. Also, a pair tweezers can be used to grasp and pull out the remaining part of the broken key.
If you are unable to remove the broken piece of key, use a lock deicer. It’s available at most hardware stores and works by freezing any moisture present inside the lock.
If none of these methods appear to be working then it’s probably time to call in a locksmith. Fitlocks experts can quickly fix problems such as broken handles or snapped keys with uPVC locks and door mechanisms. They can also alter your double glazing door mechanisms to allow them to operate more easily. Request a repair for your double glazed window repairs glazing through us online or give us a call to discuss your requirements.
Broken Cylinder
A damaged cylinder can pose a serious security threat. A locksmith professional can fix the cylinder. Locksmiths will need to tap the cylinder in order to repair it. They can do this with an hammer or another tool, but the most efficient way is to make use of a long match or piece of wire. Then, place the end of the match or wire near the keyway. After that, the locksmith can hit the lock to break it open. This is far better than using a hammer that can cause damage to the lock.
The most frequent cause for cylinder head cracks is overheating. This can occur when the cylinder block and head are made of different metals, including cast iron and aluminium. Different metals can be heated and cool at different rates. This can cause localized hotspots to expand more quickly than the rest of the cylinder.
Corrosion can be a cause of fractures in cylinders. If the head and block of a cylinder are not maintained properly they could be corroded or rust and cause them to expand more than they would normally. In time, this could also cause cracks.
If your uPVC window lock or door is stiff or requires lots of pressure to turn, it could be due to several things. A faulty locking mechanism, misalignment or a worn handle are common reasons for this issue.
This is a simple and inexpensive fix that most repairing double glazing glazing owners can do. A professional locksmith will typically be able solve this issue within a matter of hours of arriving at your property. Depending on your needs, they can replace the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith will be able to advise you of the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection against burglars. It’s a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.
Broken Handle
It’s not a surprise that window handle locks can break. They are equipped with complex mechanisms that wear out over time. If yours fails it’s difficult to determine the source of the issue and make sure you fix it properly.
Whether the problem is related to the locking mechanism inside or the latch, fixing your broken handle will increase your uPVC double glazed windows repairs glazing door’s security as well as help you stop the draughts. When you aren’t doing it right, replacing or repairing double glazing your handle can be very expensive and could cause damage to the door’s frame and lock, so it’s worth taking some time to make sure you do it right.
With the window open then loosen the screw that secures the handle by using a screwdriver. The screw should be on the inside of the backplate, which is usually hidden by a screw cap for aesthetic reasons. Be sure to not lose any of the internal components inside the handle, for example the plates or levers that are on either side of the spindle. Keep them in the same arrangement to make it simpler to replace them in the event of a need.
Then, with an additional screwdriver take the screw off that holds the handle to the spindle on the back. Once the screw is released, you’ll be able to pull the handle off and take off the damaged spindle. Replace it with a brand new spindle, ensuring that it’s the same length (you can buy them on the internet or in hardware stores). Screw it into the correct position. Be careful not to overtighten as this could cause damage to the handle or the window frame.
Ensure the new handle is correctly installed Close the window and test the handle. It should function smoothly, and you will be able open your window once more.
While you’re working on the handle, make sure to make sure your uPVC windows are closing properly. If they’re not then you may experience damp and draughts in your home, as well as compromising the efficiency of your home’s energy usage. Core Sash Windows is a local window company that can alter the hinges on the frames of your windows to ensure that they shut correctly.
Broken Spindle
It is often the case that the spindle in the handle is broken, not the handle itself. This is most common in uPVC tilt-and-turn windows. These windows require a handle to operate a locking device in the window frame. The handle is attached a central rod which activates locks that are shaped like mushrooms and secure into the frame of the window keep. If the dead latch mechanism fails to open when the handle is turned, it is likely the spindle is broken. This could be a problem that is frustrating.
Fortunately, there are ways to fix this problem. A good locksmith can quickly and efficiently fix this problem. They will be able to take apart the window handle using a tool that can remove the wheel component of the mechanism, where the spindle goes. This can be done without damage to the handle or window frame.
After removing the wheel the technician will inspect the spindle and identify the reason for its break. This involves disassembling the spindle, and then examining every component, observing any wear or damage. The process is carried out in a clean environment by highly skilled technicians.
The next step is to clean the damaged spindle, this helps eliminate any dirt or debris that could be hindering its normal functioning. Following this the spindle is cleaned, it can be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is the same size to the original. The technician will then make holes in the same way into both pieces. This will ensure that the spindle fits perfectly with the handle.
If the spindle that is damaged is beyond repair double glazing window, it may be necessary to replace it completely. Home centers sell generic replacements however if your window design is unique then you’ll require contacting an expert in woodworking or cabinet making who can recreate the exact part. After the spindle is installed, it can be connected to the handle. Place the screw holes on the handle with the screws that are already in the frame. Once the handle is firmly set, you are able to operate your uPVC windows.