Choosing Upvc Window Replacement Hinges
It’s not as difficult as it could appear to select and install the replacement hinges made of upvc. Make sure the arrows on the hinges face the right way and determine the thickness of the hinge arms on the opening frame (13mm or17mm).
There are several different types of hinges, each with their distinctive characteristics. This article will discuss the most popular kinds of uPVC window hinges and the advantages they offer.
Egress/Easy Clean Hinge
They are a great choice to replace window hinges or upgrade a fire escape safety window since they can be opened at a 90-degree angle. They can also be removed to an ‘easy clean’ position, allowing you to easily access the outside of your windows to clean them without the need to climb an overhang or climb a ladder at angles that could be dangerous.
Yale is one of the most reputable and well-known brands in the world of home security. They are suitable for all kinds of uPVC side-hung windows. By pressing a tiny button, the window sash is moved to the side and into the position that is easy to clean. After closing, the sash will automatically return to its original operative position.
They are available in 13mm and 17mm stack heights. Based on the size of your window we recommend using our Egress Selection Guide to determine which one is the best fit for your needs.
These hinges are designed to be used with a standard side-hung frame, either uPVC or aluminium. They come with an easy friction screw that can alter the amount of resistance that is generated. This makes opening the windows simpler and less likely of a mistaken closing in strong winds. They have been cycle tested to more than 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.
Without buttons or catches, the Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution for emergency egress and secure cleaning. The hinge retention clip is located on the inside of the bottom corner. This will release the top and bottom catches and allow you to slide the sash into the easy-clean position. Close the window once you have the sash in the easy-cleaning position. This will reset the hinges to their exit positions.
Fire-Escape Hinge
Fire Escape Hinges commonly referred to as “Easy Clean” hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. These kinds of hinges for windows open wider and faster than conventional hinges to provide an open space to escape in the case of a fire. Building regulations stipulate that this kind of hinge must be installed in any room that has a window.
They have an exclusive friction stay that allows the window to open at a 90 degree angle and allows the opening sash to slide across when it is open to make it easy to clean the exterior side of the glass without having to use ladders. The hinges aren’t flimsy catch or buttons and are operated with a simple, safe lever that is accessible from the inside of your home.
The hinges, made in the UK by Cotswold and Cotswold, have a child safety restriction for daily use. This can be removed with an invisible button. You’ll have peace of assurance that your children won’t open the windows too wide. They are available in 13mm and 17mm stack heights.
To purchase these hinges, measure the length of your current side-hung window hinge which fixes to the frame (see the guidelines for measuring your upvc window hinge window hinges). Choose the right size hinge from the list below.
It is important to note that the measurement is taken from the part that is fixed to the frame and not the sash, the actual hinge length could be shorter or larger based on the manufacturing process of your old windows. Also, when choosing the size of your hinge, most windows made of upvc will have a 13mm stack height. However, should your old window frame has 17mm, then select the option that fits this. You can also use the 4mm packer in order to compensate for the difference. All hinges are supplied with two hands (1 left and 1 right). The hinges do not come with screws. If needed, they can be purchased separately. We recommend using our Upvc window hinge repair screws. These are specially made to improve the performance of your hinges and allow them to function efficiently for a longer. They have a lower friction design and an improved weather seal that is fitted with a new nylon reducer end cap.
Restricted Hinge
Standard hinges can make it difficult to open windows completely. The restricted child safety friction hinges can help overcome this issue and offer a fantastic solution when ventilation is required but access to clean up or escape in the case of fire isn’t possible. They work by restricting the amount the sash can open, and allow for the control of this limitation with the push of a button. They are available in 13mm or 17mm stack heights. They are suitable for both side and top hung windows.
The Nico Restricted Egress Friction Hinge blends the advantages of a standard restrictor as well as a fire escape hinge to offer an effective and simple way to meet building regulations. It is suitable for both side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It comes in a pair that has one hinge which is the one with restricted egress and the other the unrestricted. This permits one hinge to be placed at the bottom, while the other hinge is placed on top.
These uPVC hinges are designed to be used on windows that aren’t able to be fully opened, such as the bedroom of a child. The mechanism restricts the distance the sash opens to 100mm in a safe distance and then it re-engages after the window is shut.
These uPVC friction-type hinges can be used with all types of windows. They are particularly useful for windows that are difficult to reach, such as those in three-storey apartments or those which would require a ladder. They can be combined with our selection of security enhancements like hinge guards, protection plates for hinges or dog bolts to offer PAS 24 performance.
When replacing a window hinge it is crucial to determine the length of the current hinge to ensure that you order replacements that match in size. The easiest method to do this is by viewing the hinge in the gallery and determining where you want it to be. Top hung hinges are restricted to both sides and side hung hinges are restricted to one side.
Standard Hinge
A standard hinge is made of metal-to-metal contacts and has no additional components to reduce friction. It’s available in a range of finishes and fire-rated. To quickly determine the radius of hinges, lay them out flat and place a quarter and dime in two corners. If the dime is more snug and the corner is round by 1/4 inch. If the quarter fits better, it’s rounded by 5/8 inch.
Choosing the right type of hinge can make or break the appearance of your door. It’s essential to match the style and finish of your door with its hinges for a cohesive design that is both functional and visually appealing.