How to Unstick a Suzuki Grand Vitara Key Replacement Ignis Key
Suzuki’s quirky, affordable city car gets a re-designed upgrade. It’s not a hot-hatch, however it does eat up urban and rural tarmac with gusto, while its nifty turning circle makes town centre driving effortless.
The new model also has smart driver assistance and safety tech that includes lane departure warning and a drowsiness detection alarm that’s a welcome addition on long drives.
Steering Lock
The steering lock is a security feature that prevents your Ignis from being taken when it’s in gear. It’s a useful safety feature however it can be annoying when you’re in a hurry and you’re unable to unlock your steering wheel. There are fortunately, a few easy steps you can take to fix the problem.
First, make sure that the ignition switch is in the “on” position. If this is the case, try turning the key in the same direction as you did before the wheel became locked. It can be a bit tricky, but usually it is enough to unlock the wheels.
If the wheel doesn’t unlock, you can spray a small amount of canned air into the ignition cylinder to help lubricate it. Wear eye protection to prevent getting canned air in your face. You can also make use of liquid graphite to lubricate your cylinder.
If none of these methods work, you’ll need replace the ignition lock assembly. This component is easily found in any auto parts shop. Be sure to buy the exact replacement and compare it to your old one before you attempt to install it. Remove the cover on the ignition and inspect the assembly.
Worn
The steering lock can be a bind to the ignition switch and cause the key to be stuck. This is a safety feature that is designed to stop your Ignis from rolling away while the engine is running. If this happens, you can unbind the steering wheel by manipulating it.
Over time, your ignition key may wear out and become more difficult to turn. It may not occur as often as a bad switch, but it can occur. If this is the situation, you should change your ignition key.
It is also important to determine if there’s something that is blocking your Ignis key from entering the ignition cylinder. Sometimes there can be dirt or debris that could be tucked away inside, preventing the key from turning exactly as it should.
You should also try using a bit of lubrication to see if that can help. There are a variety of lubricant you can buy, so look around your garage or visit an auto parts store in your area to find one that will work.
Another alternative is to choose a silicon “glow in the dark” key cover. These covers absorb light energy and release it in dark or murky conditions. They also help safeguard your key or fob from wear and tear. They are offered for the majority of suzuki swift smart key programming models, and are available via the internet or from a local suzuki ignis key dealership.
Bent
In time and over time, with repeated use a key can become bent. This can cause the teeth on the key to not be able to engage with the lock cylinder in the same way and prevent the key from turning the ignition. If this is the case the key will have to be replaced. It is a good plan to duplicate the spare car keys suzuki key and keep it in a secure location.
The ignition cylinder can also wear out. If the lock pins inside get stuck or snagged together, this can prevent keys from moving all the way into or out of the cylinder. Replacing the cylinder could solve this issue, but it’s best to do so before your key gets stuck in the ignition to prevent further damage.
If your Ignis keys are still stuck, even after you’ve tried the more straightforward solutions, it might be time to grease the cylinder. Graphite or liquid graphite can help the lock pins to move more freely and free your key from binds. You can buy it in most auto parts stores. When applying the lubricant, make sure your Ignis is in park. Do not try to manipulate it in order to release it. This could cause more serious issues.
Broken
If you’ve tried all of the easier things to make a key remove its stick but it’s still unable to budge, the last resort is to use some oil to move it. You can purchase this from your local auto parts store and apply it to the inside of the cylinder in the ignition lock using a cotton ball or rag. Try again. Move the key forwards and backwards gently to spread the oil. If you can massage it forward, do it but do not push too hard or you may break it in the cylinder.
The key’s internal circuitry can also become inactive due to wear and tear. This isn’t the case as often however, and you’ll need create a duplicate key.
The case of your Suzuki keyfob may also be damaged or worn. This is more prevalent when you are using a cheap key fob replica that has the shell being made of plastic or rubber. Based on the circumstances, The Key Crew can sometimes change the internal circuitry of the old key fob to an alternative shell case, avoiding the need to purchase a completely new key fob. When we contact you to schedule your service, we’ll tell you if this is a feasible option.